Hobart 500546 Airforce 700i 230-Volt Plasma Cutter

Hobart 500546 Airforce 700i 230-Volt Plasma Cutter Review

Hobart 500546 Airforce 700i 230-Volt Plasma Cutter Feature

Cuts 3/8- to 5/8-inch steel if powered by an engine-driven welder with a 240-volt generator power outlet of 8,000 watts or more
Designed for increased comfort, more efficient cooling, and economical replacement cutting tips
Built to withstand tough working environments, rated for 35% duty cycle at 104 degrees Fahrenheit
Provides peak performance power under variable input voltage conditions (+/-15%) for steady and cleaner ending cuts
Post-flow air cooling cools the torch and tip after cutting, extending life of replaceable tip and electrode

Hobart 500546 Airforce 700i 230-Volt Plasma Cutter Overview

The Hobart Air Force 700i plasma cutter can cut mild steel up to 7/8in. It provides a lightweight, powerful inverter design and an ergonomic trigger safety, with more efficient air consumption and economically priced consumables. Plasma cutters cut faster and more precise with a thinner kerf and less slag than cutting with oxy fuel. A smaller heat-affected zone also causes less warping. And you'll never have gas pressure settings, flame tuning, metal preheating, or gas cylinders or refills to worry about. U.S.A. Cutting Thickness (in.): Up to 7/8, Volts: 230, Amps: 40, Duty Cycle: 50% @ 40A, Pilot Arc: Yes, Plasma Gas Flow/Pressure: 4.8 CFM @ 90 - 120 PSI, Clamp Cable Length (ft.): 16 1/2, Power Cord (ft.): 10, Cart: No, Dimensions L x W x H (in.): 14 1/4 x 8 1/4 x 11 1/4